Crystalac Brite-Tone Finishes for Guitars


Water-based guitar finishing can be done easily in the home with these finishes from Crystalac, which are specific to guitars. Easily applied, and fast drying you can follow any typical lacquer schedule such as the one mentioned below. Can even be applied with a brush (use our Taklon brushes here.)

Brite Tone Instrument Finish is a High Solids, Super Hard, Scratch resistant, Clear Finish with exceptional Clarity. It is by far CrystaLacs hardest and clearest top coat. Brite Tone will build to a high depth very quickly due to its high solids content and will not leave a blue cast on dark exotic wood. Adheres to wood, metal and glass.

Resources:

Excellent for use on Instruments, Tables, Bar Tops, Bowl Turning & More…

  • Water Clean up – All brushes can be rinsed with Water!
  • Easy to Use – Can be Brushed or Sprayed. Self leveling.
  • Environmentally Safe – Low V.O.C  – No Toxic Chemicals used and No Obnoxious Paint Odor.
  • Quick Drying – 1 to 2 Hours. Can be re-coated every 3 – 4 hours.
  • Scratch and Chemical Resistant.
  • No issues with 3M Fre-Cut Gold (stearated sandpaper)
  • Can be used with shellac sealer
  • Made in the USA
  • Can be buffed by hand or pedestal buffer

Brite Tone Clear Lacquer Gloss – available in 8 oz, 16 oz and 32 oz.

Ships Free!!!!


Choose Size




 

Brite Tone Amber Sanding Sealer – adds a nice warm tone under the clear lacquer. Available in 8 oz, 16 oz and 32 oz.

Ships Free!!!!


Choose Size




 

Crystalac Clear Wood Grain Filler – fills open pores on woods like mahogany and rosewood. Just apply to wood, squeegee off excess, and sand after 30 minutes. May require 2-3 applications. Available in 8 oz, 16 oz and 32 oz.

Ships Free!!!!


Choose Size