CA Technologies HVLP Guns


CAtechlogoThis Colorado based company are very well designed and feature exclusives not found on other guns.

 


CSLP Pressure Feed Gun
cat_slp_web

Body: forged aluminum

Fluid passages:: stainless steel

Needle/springs: stainless steel

Air cap: anodized aluminum

Gaskets: self lubricating Teflon

Working pressure: 29 psi.

Air Consumption: 13.5 cfm

Needle/nozzle/air caps with purchase: 0.8/1.3/1.7mm

 

#CP-CSLP PRICE: $435.00



FREE SHIPPING – LIFETIME WARRANTY!


catech_cslp

 

CP-CSLP-303R2 – CSLP Gun, 1 qt regulated attached cup 1.0/1.3/1.7mm sets
PRICE: $529.50




Comes with hard case, 2 air caps, service and cleaning tools and 3 NN sets

 

 

catech_cslp-cp

 

 

 

 

 

 

FREE SHIPPING – LIFETIME WARRANTY!


LYNX Pressure Feed Spray Gun

The Lynx Spray Gun is a pressure feed gun, and like the Jaguar, it features solid, dependable construction and is made in the USA. It’s available two ways. Team it up with a remote pressure pot from C.A. Technologies (gun body shown below), or just buy it with the 1 quart pressure cup attached.

catech_L100HGun Body: forged anodized aluminum

Fluid passages: stainless steel

Needle/springs: stainless steel

Air cap: anodized aluminum

Gaskets: self lubricating Teflon

Cup: from remote pressure pot

Working pressure: 17 (L100H) or 40 (L300H) psi.

Air Consumption: (L300H) 13 cfm

Air Consumption: (L100H) 6 cfm (with 1090 air cap)

Needle/nozzle/air caps available:
(L100H) 0.8, 1.0, 1.2, 1.3, 1,5, 1.6, 1.7
(L300H) 0.8, 1.0, 1.2, 1.3, 1.4, 1,5, 1.7, 1.9, 2.2

catech_lynxcp

The Lynx 100H (CP-L100H-303R2) can be configured with an attached 1 quart pressurized cup. Makes spraying easy without a remote pressure pot and hoses. Converts easily to remote feed. If you like pressure cup spraying without attached regulators, this unit is the best. The package deal comes with 3 nozzle setups, 2 aircaps and servicing/cleaning tools.

Gun Body: forged anodized aluminum

Fluid passages: stainless steel

Needle/springs: stainless steel

Air cap: anodized aluminum

Gaskets: self lubricating Teflon

Cup: 1 qt polished aluminum pressure pot

Working pressure: 13 psi.

Air Consumption: (1090* Air Cap) 6 cfm

Needle/nozzle/air caps: 0.8, 1.0, 1.2, 1.3, 1.4, 1,5, 1.6, 1.7


ITEM PART# DESCRIPTION NEEDLE/NOZZLE/AIR CAP PRICE
#CP-L100H



Lynx L100H Lo-cfm gun, no cup in hard case 1.0, 1.3 & 1.7 .mm with #1090 and 1094  Alum Aircap $425.00
#CP-L100H-303R2



Lynx L100H Lo-cfm gun, 1 qt cup cup in hard case 1.0, 1.3 & 1.7.mm with #1090 and 1094  Alum Aircap $519.50
#CP-L100H W/PPS



Lynx L100H Lo-cfm gun, PPS Large H/O cup, 10 lids/liners, PPS adapter & regulator in hard case 1.0, 1.3 & 1.7.mm with #1090 and 1094  Alum Aircap $649.50

Jaguar Gravity Feed Spray Gun
The Jaguar J100H is a much lower cfm gun if you have a smaller compressor. Features the same great atomization as the JSLP, but with less compressor. Only 6-8 cfm required, which is in the range of most smaller shop compressors. At this price there is no better gun!

jaguar_100h
Body: forged anodized aluminum

Fluid passages:: stainless steel

Needle/springs: stainless steel

Air cap: anodized aluminum

Gaskets: self lubricating Teflon

Cup: polished aluminum with rotating vent hole 750cc (26 oz)

Working pressure: 13-15 psi.

Air Consumption: 8 cfm

Needle/nozzle (mm): 1.0, 1.2, 1.3, 1.4, 1,5, 1.6, 1.7.

Air caps: 1090/1094

j100hcatpack

 

BEST BUY! – Comes in a hard case with gun holder, regulator, service tools, filters 4 NN setups (1.0, 1.4 1.5 & 1.7mm), 2 aircaps and mini-regulator.

LIFETIME WARRANTY!

#PPS/MEDSTART – add the starter kit for J100H – includes 1 medium cup and collar, 10 lids/liners, PPS adapter (available only with purchase of gun)

PRICE: $65.00

 

 

Jeff,

The Jaguar sprays like a dream. After talking with you I was expecting good, but it is phenomenal.

You may recall that on my current project I’m spraying oil based BM Impervo. I used the 1.7 mm needle and the 1093 air cap. My Porter Cable side-stack portable compressor is rated at 8.3 SCFM at 40 PSIG and I cut a long section of 1/2 inch air hose down to 15 feet. I thinned with Naphtha to 50 seconds using a #4 Ford cup. It took me 10-15 minutes of practice on cardboard to get the settings dialed in. I started at 15 PSI on the regulator and the atomization was good–when I took it up to 18 (stamped on the air cap) the atomization was flawless.

As a rule, I always sand between coats, but this morning I ran my hand over the dry finish and I’m seriously contemplating not sanding. The finish is that good. The Jaguar is clearly a high-precision, high- quality piece of equipment. In the past I’d always leaned toward hand- applied finishes.That’s all changed now, I know I’ll be spraying a lot more in the future.

Oh, and the 3M system makes cleanup almost a joy–very easy and fast, what a great invention.

Thanks for the time you spent on the phone and for the high quality service, products and education that you provide.

Matt Doyel – Windsor CA

 

ITEM PART#   DESCRIPTION NEEDLE/NOZZLE/AIR CAP PRICE
#CP-J100H-W



Jaguar J100H Lo-cfm gun, aluminum cup, regulator in hard case 1.0, 1.4, 1.5 & 1.7.mm with #1090 and 1094  Alum Aircap $464.00 Best Seller!
#CP-J100H W/PPS



Jaguar J100H Lo-cfm gun, aluminum cup, PPS medium cup, 10 lids/liners, PPS adapter & regulator in hard case 1.0, 1.4 & 1.7.mm with #1090 and 1094  Alum Aircap $529.00

*Other air caps available, but cfm requirements will increase. Contact us for more info.


 

 

 

 

 


RESOURCES

C.A. Technology website