QualSpray Lutherie Accessories
Everything on this page SHIPS FREE!!!!!
Measuring
New!! Ford #4 Economy Viscosity Cup for precise measurement of finish viscosity. Not for paints. Similar to cups shipped with Turbine systems like Fuji. Sold only in packs of 3.
#QS-817 – Economy Viscosity Cup Ford #4 pkg/3 – $15.99
A Mil Gauge is necessary for measurement of wet finishes. Instructions for use are on the reverse of this metal gauge. Use for determining dry mil thickness.
#A8231 – Mil Gauge – $8.95
Cleaning Equipment
#QS813 Basic Cleaning Kit – $28.95
This kit has the basic brushes and micro brushes for general gun maintenance. Good for gravity, touch up and siphon guns.
Includes:
12″ pick up tube cleaning brush
1/4″ twisted bristle brush
1/2″ twisted bristle brush
Detail end brush
Nylon bristle parts brush
5 pc. miniature brush set
6 pc. precision needle set
Includes:
A – 1/2″ twisted bristle brush
B – O-ring removal tool
C – Gun Lube
D – 12″ pick up tube cleaning brush
E – 1/4″ twisted bristle brush
F – 6 pc. precision needle set
G – 5 pc. miniature brush set
H – Nylon bristle parts brush
I – Detail End Brush
The 5 piece Mini-Brush set in all the Cleaning Kits above gets the most use. Customers asked for replacements so here they are – 5 replacement mini-brushes on a ring.
#BQ-M05 – PRICE: $9.95
Air Treatment & Regulation
#QSNSG – 100 mesh micro-filter for gravity guns (fits Asturo, QualSpray and most other guns with a 7/16″ fluid inlet (pkg. of 10) – $23.00
QualSpray Transparent In-line Filter – removes air line water before it can get into your gun or pressure tank. Easily mounts right at the tool air inlet to provide the best protection. Water is purged by depressing a small plunger and the filter can be taken apart and cleaned if necessary. Item is bi-directional.
#QS-F1 – PRICE: $31.00
QualSpray Professional Regulator/filter – traps 99% water, and oil and contaminants down to 5 micron. Large body design allows mounting to a wall with built in bracket. 120 cfm flow capacity and 300 psi maximum pressure. 1/2 NPS inlet and 1/4 NPS outlet with shut off valve. Large self-relieving regulator reads accurate pressure. Manual drain. The best in filtration at a great price. Best when used 25′ or more downstream of compressor.
#QS614FR – $165.00 Regulator/filter with regulator and gauge
This regulator is about 1/2 the size of a standard gun regulator like the QS-03. Ideal for the smaller footprint of detail guns or whenever you want to use a smaller regulator. Can be used with gravity feed and pressure feed gun with a 1/4″ thread. .
1/4″ threaded male (on input) and 1/4″ female (on output). Gauge calibrated
0-150 psi. Diaphragm type regulates air more consistently. Glass lens.
#R-11 – Super- Mini Regulator with gauge
(for connecting to spray gun at inlet) – $33.00